Re: Lua on Microcontrollers

["John Hind" <john.hind@...>]

> Date: Tue, 10 Dec 2013 21:09:44 +0200
> From: Bogdan Marinescu <bogdan.marinescu@gmail.com>
> Subject: Re: Lua on Microcontrollers

> About memory, 2M or even 1M of RAM is enough to implement quite a bit
> of functionality with eLua. And there are also MCUs that can work with
> SDRAM
> memory:
>
> http://www.embeddedartists.com/products/boards/lpc4088_qsb.php
>
> That thing has 32M of SDRAM, which is more than enough for any embedded
> Lua application that I can think of.
> And there is also this:
>
> http://am.renesas.com/products/mpumcu/rz/rza/rza1/index.jsp
>
> All in all, internal RAM is evolving in the correct direction for eLua.

Hi Bogdan,

I'd not realised you were still actively developing eLua.

Have you considered a port of eLua onto Raspberry Pi and/or Beaglebone Black? Of course, Lua can easily be installed on these under Linux, but I mean running "bare metal" without an OS. So it would just be a route to getting a low-cost target board with plenty of RAM. The "microcontroller + SDRAM" boards all seem to be very poor value compared to these little Linux boards.

Of course if the single chip microcontrollers get up to a few M RAM rather than a few hundred K as at present, the problem would go away, but we do seem to have been waiting a long time for this now.

The thing I really like about the MicroPython approach is the composite USB device: it presents for development as both a serial console port and a mass storage device. This allows editing of scripts directly on the device from any host computer without having to faf about with file transfer over a serial link.

- John



---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com